BRI trunk

[Manolis]

Hi there,
I have a Lucent Definity G3si rel 6.0, and i have to use it with a cisco 3640 in order to implement voip.
3640 is connected to Definity via 2 BRI lines (wich comes from BRI LINE (TN556C) card)
How can i create a trunk in order to use those BRI lines lines under tac ?
thank you in advance for your time and attention


Stamatakis Emmanuel

 

[JZon]

You can add the TN556 as a trunk-bri board. But keep in mind that the card can be used either for bri-stations or bri-trunk.

Hope this helps..

John