Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Displaying time/date on phone
- Thread starter sk1053
- Start date
- Thread starter
- #3
About the date/time on 6400 phones. If it doesn't come up. There are a few things you can try.
1) Busy/Release the station. This tends to always jump start it.
2) Unplug/Replug phone in jack. This is another way to kind of boost the phone.
3) Try using a RJ-48 cord instead of an RJ-11. This isn't a guaranteed fix, but it has worked for me in the past.
Hope that helps.
1) Busy/Release the station. This tends to always jump start it.
2) Unplug/Replug phone in jack. This is another way to kind of boost the phone.
3) Try using a RJ-48 cord instead of an RJ-11. This isn't a guaranteed fix, but it has worked for me in the past.
Hope that helps.
actaeon1979
Instructor
sk1053,
about your problem of names and calling-id dissapearing after a couple of second, I think this is the problem:
(sounds pretty stupid but is usually the problem
If your softkey-buttons (menu in display) are empty and the softkey-menu is still active, the screan will appear empty but will actually still be in the menu. Just check this and ask your users to exit the menu.
Hope this helps!
Rgds,
MaartenC
about your problem of names and calling-id dissapearing after a couple of second, I think this is the problem:
(sounds pretty stupid but is usually the problem
If your softkey-buttons (menu in display) are empty and the softkey-menu is still active, the screan will appear empty but will actually still be in the menu. Just check this and ask your users to exit the menu.
Hope this helps!
Rgds,
MaartenC
- Status
Similar threads
- Locked
- Question