×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

G3SI/CMS Netmask Settings

G3SI/CMS Netmask Settings

G3SI/CMS Netmask Settings

(OP)
My G3SI and CMS server are on the same network segment.  They both plug in to the same Cisco switch, one on port 2 and the other on port 3.  Port 1 goes to our router so that others can get into CMS with CentreVu.  My problem is, even though the G3SI and CMS are plugged into the same Cisco switch, and their IP's reflect that they are on the same segment, if our router goes down, they can't see each other anymore, and CMS stops taking measurements.  I believe it is that the G3SI and CMS do not have the same netmask.  Does anyone know how to assign a netmask in the G3SI?

RE: G3SI/CMS Netmask Settings

Which version?  Should be "change node-names".

-CL

RE: G3SI/CMS Netmask Settings

You can go to ch ip-interface & assign the subnet mask to the C-Lan card. I am doing it same. Also do a trace-route ip x.x.x.x & see whether you use the router to reach the CMS or not. It should solve your problem..

Let me know if this helps..

RE: G3SI/CMS Netmask Settings

My system is setup with all the PBX parts on a Hub by them selfs. This was the way Avaya wanted it then I have the Hub attached to the network. So if the switch goes down I am still collecting data on the cms, call accounting audix etc...

RE: G3SI/CMS Netmask Settings

(OP)
Definity,

I have a version 7 and don't have the option of ch ip-interface.  I do have ch node-names in this version but I'm not sure what I need to do.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close