Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I configure a 15 channel PRI?

Status
Not open for further replies.

Richard_Harrow

Technical User
Aug 31, 2023
26
0
1
AE
So I've got a PRI line setup for 30 channels on my IP Office system, but the PRI's being swapped out for a 15 channel one.

How do I configure the line for 15 channels? Do I just change all values that are set to 30 to 15?

Also, I noticed that the data channels are also set to 30. Shouldn't they be at 1 considering there's only one D-channel in a PRI line?
 
Depends on the type of PRI line but they all have a page for the settings for each channel where you can use the Admin setting to set particular channels Out of Service.

Stuck in a never ending cycle of file copying.
 
Hey, sizbut.

I'm using the universal PRI line type on IP Office. Can't I just set all the values to 15 for a 15 channel PRI?

I've attached a screenshot.

PRI_tpxtzg.png
 
Hey, Derfloh.

I just have one question. If I set everything in the ETSI to 15 channels, would it allow the 15 channel PRI to function properly?

Sorry, I just haven't worked with IP Office in a while.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top