Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem link E1 hip4000 to CO thought Huawei system 1

Status
Not open for further replies.
Karmozdi

Karmozdi

Technical User
Feb 18, 2019
154
US
hello dear Sbcsu
I have problem about E1 trunk Hip4000 with CO Communication thought Huawei system
Hip 4000 is ETSI-S2COD slave and SMD and CRC4 are N
in Communication on Huawei system is Master and CRC4 N
I change variants Protvar and DEV and change LWPAR but I didn't have any signaling.
Please help me how can I configuration trunk rout?
best regards
..................
ADD-TDCSU:NEW,1-05-014-1,0,0,0,0,70,32,1,"ISDN ",10,ETSI,1,,NONE,,,,GDTR,N,CO,NONE,N,0,,00,0,,,2995,10,MANY,10,2,1,1,EMPTY,0,5,N,,,,,,16,8,1,10,,EC&G711&G729AOPT,,22,CIR,N,TRADITIO,0,60,60,S2COD,1&&30,N,1,3,0,0,0,0,0;

CHANGE-LWPAR:DIUS2,3,COPPER,S2,ON,N,16,0,D5,10,10,N,Y,DF,N,0,255,N,N,INDEP,;
RESTART-BSSU:pEN,1,5,14,;
DEACT-DSSU:DI,PEN,1-5-14-1;
ACTIVATE-DSSU:AUL,BCHAN,1-5-14-1;
MULTLINE 30 . . . . . . . . . . . . . .UNACH
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN UNACH/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH/CP
002 NETWORK SUBUNIT . TMD CO ISDN UNACH/CP
(ALT_ROUT: N) (S2COD )
 
Sort by date Sort by votes
You need to perform
REST-DSSU:pEN,1-5-14-1;
and show us
STA-HISTA:SEARCH,2023-06-23/08:25,;
where 2023-06-23/08:25 is the date and time
of the rest command execution
 
Upvote 0 Downvote
thank you very much in dead
here you are
START-HISTA:SEARCH,"2023-06-23/17:30";
H500: AMO HISTA STARTED
H1: 00012 ERROR MESSAGES FOUND

F5906 E8 N0065 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:12
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:032 TSL: 00

F5906 E8 N0066 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:12
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:048 TSL: 01

F5906 E8 N0067 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:15
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:033 TSL: 02

F5906 E8 N0068 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:17
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:049 TSL: 03

F5906 E8 N0069 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:17
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:034 TSL: 04

F5906 E8 N0070 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:18
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:050 TSL: 05

F5906 E8 N0071 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:20
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:035 TSL: 06

F5906 E8 N0072 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:22
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:051 TSL: 07

F5418 E8 N0073 IN SERV BPA CIRCUIT LX ACTIVE 23-06-23 18:14:14
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:07H LAYER 1 ACTIVE (GREEN)
FORMAT:36 DEVICE NAME: S2CONN

F5414 E8 N0074 OUT SERV BPA CIRCUIT L2 ERROR 23-06-23 18:14:15
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:08H FRMR, DM OR F-BIT
FORMAT:36 DEVICE NAME: S2CONN

F5414 E8 N0075 OUT SERV BPA CIRCUIT L2 ERROR 23-06-23 18:14:20
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:08H FRMR, DM OR F-BIT
FORMAT:36 DEVICE NAME: S2CONN

F5418 E8 N0076 IN SERV BPA CIRCUIT LX ACTIVE 23-06-23 18:14:24
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:09H LAYER 3 ACTIVE
FORMAT:36 DEVICE NAME: S2CONN

AMO-HISTA-111 READ HTS HISTORY FILE
START COMPLETED;
 
Upvote 0 Downvote
sorry dis log is after reset
REST-DSSU:pEN,1-5-14-1;
START-HISTA:SEARCH,"2023-06-23/17:30";
H500: AMO HISTA STARTED
H1: 00016 ERROR MESSAGES FOUND

F5906 E8 N0065 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:12
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:032 TSL: 00

F5906 E8 N0066 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:12
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:048 TSL: 01

F5906 E8 N0067 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:15
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:033 TSL: 02

F5906 E8 N0068 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:17
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:049 TSL: 03

F5906 E8 N0069 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:17
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:034 TSL: 04

F5906 E8 N0070 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:18
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:050 TSL: 05

F5906 E8 N0071 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:20
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:035 TSL: 06

F5906 E8 N0072 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:22
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:051 TSL: 07

F5418 E8 N0073 IN SERV BPA CIRCUIT LX ACTIVE 23-06-23 18:14:14
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:07H LAYER 1 ACTIVE (GREEN)
FORMAT:36 DEVICE NAME: S2CONN

F5414 E8 N0074 OUT SERV BPA CIRCUIT L2 ERROR 23-06-23 18:14:15
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:08H FRMR, DM OR F-BIT
FORMAT:36 DEVICE NAME: S2CONN

F5414 E8 N0075 OUT SERV BPA CIRCUIT L2 ERROR 23-06-23 18:14:20
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:08H FRMR, DM OR F-BIT
FORMAT:36 DEVICE NAME: S2CONN

F5418 E8 N0076 IN SERV BPA CIRCUIT LX ACTIVE 23-06-23 18:14:24
ALARM CLASS:SWU-PER:001
** :LTG1 :LTU5 :014: 00 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:09H LAYER 3 ACTIVE
FORMAT:36 DEVICE NAME: S2CONN

F5412 E8 N0077 OUT SERV BPA CIRCUIT L1 ERROR 23-06-23 18:35:32
ALARM CLASS:SWU-PER:000
** :LTG1 :LTU5 :014: 01 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:06H REMOTE ALARM (YELLOW) (DISTANT ALARM)
FORMAT:36 DEVICE NAME: S2COD

F5418 E8 N0078 IN SERV BPA CIRCUIT LX ACTIVE 23-06-23 18:35:33
ALARM CLASS:SWU-PER:000
** :LTG1 :LTU5 :014: 01 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:07H LAYER 1 ACTIVE (GREEN)
FORMAT:36 DEVICE NAME: S2COD

F5418 E8 N0079 IN SERV BPA CIRCUIT LX ACTIVE 23-06-23 18:35:33
ALARM CLASS:SWU-PER:000
** :LTG1 :LTU5 :014: 01 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
REASON:09H LAYER 3 ACTIVE
FORMAT:36 DEVICE NAME: S2COD

F5413 E8 N0080 STATIST BPA CIRCUIT L2 SPOR ERROR 23-06-23 18:35:34
ALARM CLASS:SWU-PER:000
** :LTG1 :LTU5 :014: 01 : 0 Q2196-X DIU-N2/1 BST:01 PLS:-07
FORMAT:22 DEVICE NAME: S2COD
0200010146FFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFF

AMO-HISTA-111 READ HTS HISTORY FILE
START COMPLETED;
 
Upvote 0 Downvote
I could connected with CO PRI through Openscap X8 with QSIG ECMA slave without CRC4 check but I didn't connect by Hipath 4000 V7
 
Upvote 0 Downvote
You need to change the protocol. For this

DEA-DSSU:DI,PEN,1-5-14-1;
CHANGE-TDCSU:pEN=1-5-14-1,PROTVAR=ECMAV2,SEGMENT=8,DEV=S0COD,BCGR=1;
ACT-DSSU:,PEN,1-5-14-1;

!!! You need to check the cable from the standby processor to LTUCA 5 LTU

F5906 E8 N0070 NO ACT BPA LTUC STBY CABLE DEFECTIVE 23-06-23 18:04:18
ALARM CLASS:CENTRAL:004
** :LTG1 :LTU5 :007: 00 : 0 Q2266-X LTUCA BST:01 PLS:-15
FORMAT:43
LTUC STBY CABLE DFECTIVE
OR MISSMATCHED
VERIFY STBY CONNECTION
HWY:050 TSL: 05
 
Upvote 0 Downvote
ETSI will probably work fine, you'll just get basic call, no features. Depends what is set on the other side.

You don't want to set S0COD if it's 30 channels.

CRC4 is controlled on 4K by the LWPAR QUAL parameter, not the CRC4REP parameter, and you have it switched on.

You should definitely deal with that standby cable error.
 
Upvote 0 Downvote
hello dear Masviss
thank you very much in advance
I change it but With this error
CHANGE-TDCSU:1-5-14-1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,S0COD;
H500: AMO TDCSU STARTED
F48: CIRCUIT 1 IS INCOMPATIBLE WITH DEVICE
PEN = 1-5-14-1
F48: CIRCUIT 1 IS INCOMPATIBLE WITH DEVICE
PEN =
-----------------------
also I couldn't define tdcsu with BCGR 1.
ADD-TDCSU:NEW,1-05-014-1,100,100,0,0,100,1,1,"CO PRI ",0,ECMAV2,8,,NONE,,
,,GDTR,N,CO,NONE,N,0,,00,0,,,,31,MANY,1-1-110,0,1,1,EMPTY,10,5,N,,,,,,16,8,0,
10,,EC&G711&G729A,"",100,CIR,Y,TRADITIO,0,60,60,S2COD,1&&30,N,1,1,0,0,0,0,0;
H500: AMO TDCSU STARTED
F21: BCGR 1 ALREADY EXISTS
BCGR = 1
LWPAR = 1
LWPP = ;
F21: BCGR 1 ALREADY EXISTS
BCGR = 1
LWPAR = 0
LWPP = ;
F21: BCGR 1 ALREADY EXISTS
BCGR = 1
LWPAR = 3
LWPP = ;
F21: BCGR 1 ALREADY EXISTS
BCGR =
--------------------------
thanks a lot
 
Upvote 0 Downvote
ADD-TDCSU:NEW,1-05-014-1,100,100,0,0,100,1,1,"CO PRI ",0,"ECMAV2",8,,NONE,,,,GDTR,N,CO,NONE,N,0,,00,0,,,,31,MANY,1-1-110,0,1,1,EMPTY,10,5,N,,,,,,16,8,0,10,,EC&G711&G729A,,100,CIR,Y,TRADITIO,0,60,60,S2COD,1&&30,N,1,1,0,0,0,0,0,,;
Now tdcsu is Ok but with S2COD and I have this log :
DIS-SDSU:ALL,,PEN,PER2,1,5,14,1;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-AP370013-----SG 1 LTU 5 --------------------- READY
** .LTG 1.LTU 5.014 DIU-N2 Q2196-X READY
CCT LINE STNO SI BUS TYPE
001 2879 PP NW READY

-------------------------------------
Also this log:
DIS-SDSU:ALL,,PEN,PER3,1,5,14,1;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-AP370013-----SG 1 LTU 5 --------------------- READY
** .LTG 1.LTU 5.014 DIU-N2 Q2196-X READY
CCT LINE STNO SI BUS TYPE
001 2879 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
002 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
003 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
004 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
005 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
006 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
007 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
008 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
009 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
010 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
011 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
012 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
013 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
014 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
015 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
016 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
017 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
018 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
019 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
020 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
021 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
022 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
023 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
024 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
025 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
026 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
027 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
028 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
029 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
030 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT
DISPLAY COMPLETED;
<
I
 
Upvote 0 Downvote
You made a mistake. Now trunk 1-5-14-1 has LWPAR=1 this is wrong.
You need to fix it.
DEA-DSSU:DI,PEN,1-5-14-1;
CHANGE-TDCSU:pEN=1-5-14-1,LWPAR=3;
ACT-DSSU:,PEN,1-5-14-1;
Show us
DIS-LWPAR:,,,DIUS2,3;
 
Upvote 0 Downvote
hello
good morning dear
this is LWPAR log and tdcsu trunk :
DIS-LWPAR:,,,DIUS2,3;
H500: AMO LWPAR STARTED

+-----------------------------------------------------------------------+
| LOADWARE PARAMETERS CIRCUIT TYPE: DIUS2 SOURCE:DB BLOCK: 3 |
+-----------------------------------------------------------------------+
| LNTYPE = COPPER VERSION = S2 QUAL = ON |
| MASTER = N DCHAN1 = 16 DCHAN2 = 0 |
| PATTERN = D5H QUAL1 = 10 SEC. QUAL2 = 10 MIN. |
| SMD = N PERMACT = Y FCBAB = DFH |
| CDG = N FIXEDTEI = 0 CNTRNR = 255 |
| TEIVERIF = N CRC4REP = N |
| DEV = INDEP |
| INFO = |
+-----------------------------------------------------------------------+

ADD-TDCSU:NEW,1-05-014-1,100,100,0,0,100,1,1,"CO PRI ",0,"ECMAV2",8,,NONE,,,,GDTR,N,CO,NONE,N,0,,00,0,,,,31,MANY,1-1-110,0,1,1,EMPTY,10,5,N,,,,,,16,8,0,10,,EC&G711&G729A,,100,CIR,Y,TRADITIO,0,60,60,S2COD,1&&30,N,1,3,0,0,0,0,0,,;
---------------------------------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-AP370013-----SG 1 LTU 5 --------------------- READY
** .LTG 1.LTU 5.014 DIU-N2 Q2196-X READY
CCT LINE STNO SI BUS TYPE
001 2879 PP NW DEPLOCK/NPR
 
Upvote 0 Downvote
Good morning,
this lwpar does not match your crc4 enabled data. You need to do
CHA-LWPAR:DIUS2,3,COPPER,S2,OFF;
crc4 is off if qual=off
and
rest-dssu:pen,1-5-14-1;
 
Upvote 0 Downvote
Ok dear
after reset now it is ready but Chanels are GENNR/CP
DIS-SDSU:ALL,,PEN,PER3,1,5,14,1;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-AP370013-----SG 1 LTU 5 --------------------- READY
** .LTG 1.LTU 5.014 DIU-N2 Q2196-X READY
CCT LINE STNO SI BUS TYPE
001 2879 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
002 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
------------------------------------------------------
CHANGE-LWPAR:DIUS2,3,COPPER,S2,OFF,N,16,0,D5,10,10,N,Y,DF,N,0,255,N,N,INDEP,;
ADD-TDCSU:NEW,1-05-014-1,100,100,0,0,100,1,1,"CO PRI ",0,"ECMA1",8,,NONE,,,,GDTR,N,CO,NONE,N,0,,00,0,,,,31,MANY,1-1-110,0,1,1,EMPTY,10,5,N,,,,,,16,8,0,10,,EC&G711&G729A,,100,CIR,Y,TRADITIO,0,60,60,S2COD,1&&30,N,1,3,0,0,0,0,0,,;
 
Upvote 0 Downvote
here you are
+-------------------------------------------------------------------------+
| R E F E R E N C E C L O C K C I R C U I T S |
+--------------+---------+----------+---+------+------+------+-----+------+
| PEN | MODULE | DEVICE |PRI|ERROR |BLOCK |SUPP. |READY|SRCGRP|
| | | | | | | |BUT | |
| | | | | | | |ASYN.| |
+--------------+---------+----------+---+------+------+------+-----+------+
| 1- 5- 14- 1 | DIU-N2 | S2COD | 0| 65535| N | | N | 1|
| 1- 5- 14- 0 | DIU-N2 | S2CONN | 0| 62225| N | | N | 1|
+--------------+---------+----------+---+------+------+------+-----+------+
 
Upvote 0 Downvote
For a slave trunk, the priority should not be equal to 0.
You need to do
DEA-DSSU:DI,PEN,1-5-14-1;
CHA-REFTA:CIRCUIT,1-5-14-1,89;
ACT-DSSU:,PEN,1-5-14-1;
 
Upvote 0 Downvote
still Chanels are GENNR/CP

DIS-SDSU:ALL,,PEN,PER3,1,5,14,1;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-AP370013-----SG 1 LTU 5 --------------------- READY
** .LTG 1.LTU 5.014 DIU-N2 Q2196-X READY
CCT LINE STNO SI BUS TYPE
001 2879 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
(ALT_ROUT: N) (S2COD )
LINE: 2879 STNO: SI:
001 . . . . . . . . TMD CO ISDN GENNR
002 NETWORK SUBUNIT . TMD CO ISDN GENNR/CP
 
Upvote 0 Downvote
The protocol must be ECMAV2.
Now perform
DEA-DSSU:DI,PEN,1-5-14-1;
CHANGE-TDCSU:pEN=1-5-14-1,PROTVAR=ECMAV2,DEV=S0COD;
ACT-DSSU:,PEN,1-5-14-1;

Please show us
REG-PRODE;
DIS-REFTA;
and
STA-HISTA:SEARCH,2023-06-23/08:25,;
 
Upvote 0 Downvote
hello dear Masviss
thank you for support me
Protocol is ECMA2 and DEV is S2COD.vene when I change DEV to S0COD show this error :
F48: CIRCUIT 1 IS INCOMPATIBLE WITH DEVICE
but S2COD is ok.
---------------------
REG-PRODE;
H500: AMO PRODE STARTED
COPY-PRODE:pVCD,1;
---------------------
DIS-REFTA;
H500: AMO REFTA STARTED
+-------------------------------------------------------------------------+
| R E F E R E N C E C L O C K C I R C U I T S |
+--------------+---------+----------+---+------+------+------+-----+------+
| PEN | MODULE | DEVICE |PRI|ERROR |BLOCK |SUPP. |READY|SRCGRP|
| | | | | | | |BUT | |
| | | | | | | |ASYN.| |
+--------------+---------+----------+---+------+------+------+-----+------+
| 1- 5- 14- 0 | DIU-N2 | S2CONN | 0| 1900| N | | N | 1|
| 1- 5- 14- 1 | DIU-N2 | S2COD | 89| 285| N | X| N | 1|
+--------------+---------+----------+---+------+------+------+-----+------+
--------------------------
STA-HISTA:SEARCH,2023-06-26/17:52,;
H500: AMO HISTA STARTED
H1: 00000 ERROR MESSAGES FOUND
---------------------------
ADD-TDCSU:NEW,1-05-014-1,100,100,0,0,100,1,1,"CO PRI ",0,"ECMAV2",8,,NONE,,,,GDTR,N,CO,NONE,N,0,,00,0,,,,31,MANY,1-1-110,0,1,1,EMPTY,10,5,N,,,,,,16,8,0,10,,EC&G711&G729A,,100,CIR,Y,TRADITIO,0,60,60,S2COD,1&&30,N,1,3,0,0,0,0,0,,;
-----------------------
CHANGE-LWPAR:DIUS2,3,COPPER,S2,OFF,N,16,0,D5,10,10,N,Y,DF,N,0,255,N,N,INDEP,;
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Hamid2018
  • Question
TDCSU channeling on PRI-E1
Replies
3
Views
143
wanyin
wanyin
Karmozdi
  • Locked
  • Question
Setting Incoming call link E1 to 4000 V10
Replies
0
Views
245
Karmozdi
Karmozdi
mystr
  • Locked
  • Question
System error
2
Replies
37
Views
2K
member 1453342
M
dadi27
  • Locked
  • Question
help for E1
Replies
0
Views
301
dadi27
dadi27
Karmozdi
  • Locked
  • Question
problem connect Hipath 4000 to Cisco 2821 router by an PRI E1 link.
Replies
1
Views
300
sbcsu
sbcsu

Part and Inventory Search

Sponsor

Back
Top