×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Problem AspireNET ISDN SV9100

Problem AspireNET ISDN SV9100

Problem AspireNET ISDN SV9100

(OP)
Hi Experts,
We have 2 systems NEC SV9100, site A and B , we are using 2 cards PRTA for connect Site A - Site B via AspireNET ISDN method. Internal call is Okay, but from Site B can't remote trunk access of site A by dial 9 (9 is Local access trunk of Site A).
Site A: 1xxx: Extension
2xxx: Networking System Access ID 1
9x: Trunk
Site B: 1xxx: Networking System Access ID 1
2xxx: Extension
9x: Networking System Access ID 1
How to fix this problem?

RE: Problem AspireNET ISDN SV9100

NEC 9100 does Aspirenet?

RE: Problem AspireNET ISDN SV9100

You don't have your F-route and dial treatments setup possibly OR have trk to trk through mode flagged.

RE: Problem AspireNET ISDN SV9100

(OP)
@Coral Tech
Site A: 9 is trunk access code
Site B: 9 is Networking system access ID 1.
From site B dial 9, we get that site A received number 9 but can’t seizure Site A’s trunk.
In AspireNet ISDN, PRTA card don’t show as a trunk. We can’t use F-route.

RE: Problem AspireNET ISDN SV9100

(OP)
Could you guide me on how to program linking SV9100-SV9100 via PRTA card?
Hardware is available so we need PRG step by step.
Thanks all!

RE: Problem AspireNET ISDN SV9100

Do you have the upgraded PAL in both systems?

RE: Problem AspireNET ISDN SV9100

(OP)
I didn’t upgrade PAL in both system. Internal call is okay, capacity system port is available.
When we set PRTA card mode T-point, master/slave then Layer 2 error ISDN, call failed.

RE: Problem AspireNET ISDN SV9100

ISDN Networking is only available for the Aspire M/L/XL system. In addition, the NTCPU must have a Feature Upgrade or Enhanced PAL chip installed.

Right out of the networking manual.

RE: Problem AspireNET ISDN SV9100

Aspirenet isn't a supported feature for the US SV9100 but is in the EU. Maybe that's where the confuse is?

RE: Problem AspireNET ISDN SV9100

I mean if this is an SV9100 you can set it up just as a tie line. I'm sure it would require licensing regardless.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close