NTDW20 programming

BRUE23 · Apr 4, 2023

Have worked/repaired these for some time but have a unit that says on boot "to change configuration enter mgcsetup".
After entering IP info it asks for "ADA MGMT IP address".
I have never seen this before. If I bypass it returns to "to change configuration enter mgcsetup".
Anyone seen this or can be of any assistance?
Thank you

bignose21 · Apr 11, 2023

I thought ITS like an MGC (Apart from having 2 ports one for each shelf) you just do IP Address/Mask/Gateway and CS Address, then no to the Advanced Parameters

bignose21 · Apr 11, 2023

maybe it is in a sec domain and after the UCM/SMGR whichever you are using

bignose21 · Apr 11, 2023

some info here

https://pbxbook.com/meridian/install/newmgx.html

or flatten it like an MGC here

https://pbxbook.com/meridian/install/mgcgold.html

BRUE23 · Apr 11, 2023

Thanks bignose, the cards were connected to Avaya Aura so we had to default/replace hardware to get them back to "normal".
Thanks for your help

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

NTDW20 programming

BRUE23

Vendor

bignose21

Programmer

bignose21

Programmer

bignose21

Programmer

BRUE23

Vendor

Similar threads

Part and Inventory Search

Sponsor