IP500 V2 DS30 card not working. 1

Shermanchicken · Jan 24, 2023

I have DS 30 expansion card that when powered up it goes solid red then solid green for about 30 seconds then solid red and keeps repeating these changes. Never flashing lights just solid to solid. It never shows up connected in System Status. Any ideas?

Thanks

budbyrd · Jan 24, 2023

Unplug all the stations and see if it comes up. If it does you have a PC plugged in somewhere. Plug them back in one at a time until it fails.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

Shermanchicken · Jan 24, 2023

There is nothing plugged in. It’s on the workbench.

budbyrd · Jan 24, 2023

This is a link to the instructions for a DTE reset if it is just a firmware problem. If that doesn't work it is probably dead.

https://www.tek-tips.com/faqs.cfm?fid=7860

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

IP500 V2 DS30 card not working. 1

Shermanchicken

Technical User

budbyrd

Vendor

Shermanchicken

Technical User

budbyrd

Vendor

Similar threads

Part and Inventory Search

Sponsor