I’m running a Merlin Legend Rel 7 in my home. My question is Caller ID only displays on the Primary line. If the primary line is idle, and the secondary line rings, there is no caller id. I’m using MX display phones, the Display Caller ID feature is programmed as a button on every display phone (turned on), and the card is a 408 GS/LS-ID-MLX. I tested the CO lines individually and caller id comes through. Any thoughts? Also, is there a way to permanently keep the Caller Id featured turned on at every phone instead of having to dedicate a button to it?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Merlin Legend Call ID
- Thread starter Jim E
- Start date
![[love2]](/data/assets/smilies/love2.gif "[love2] [love2]")
"FEATURE 00- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question