×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

500 sets staying disabled on a CS1000

500 sets staying disabled on a CS1000

500 sets staying disabled on a CS1000

(OP)
want to disable 500 sets on a CS1000 and to delete ports not being used. but at midnight the system enables them back. how can I stop this.

RE: 500 sets staying disabled on a CS1000


That's odd as usually the midnight routines disable digital sets that aren't connected. Analogue sets aren't really affected as the system can't test them.

Two choices

One, stat the card slots in LD 32 using e.g. STAT "004 0 0" etc. You can also stat the individual TN.
Look for ones that are disabled.

Once you have found them, go into LD 10

REQ: OUT
TYPE 500
TN "TN"

Sometimes, they can't be removed if the set is being monitored or it belongs to a hunt group. You need to remove the DN from the hunt group and the TN from the digital set that is monitoring it.

The attached guide is old but is easy to follow.


Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close