Call Pilot 100 Boot Fail
Call Pilot 100 Boot Fail
(OP)
New job and helping out on a VM issue they have.
With Putty and a serial cable I see where the Flash card not initialized.
Figure it has lost its config.
My experience is on a CS1000 that had CP but everything was backed up, this is not the case here.
Do I assume at this point the system is now a boat anchor?
With Putty and a serial cable I see where the Flash card not initialized.
Figure it has lost its config.
My experience is on a CS1000 that had CP but everything was backed up, this is not the case here.
Do I assume at this point the system is now a boat anchor?
RE: Call Pilot 100 Boot Fail
Callpilot 100 voicemail is down.
Lets get some details first...
-What does F983 say on the display?
-Do the LED's work?
-Are they steady on , if so which ones?
-Or, do the LED's or serial text keep repeating the cycle?
-Are the RJ11 ports connected to the phone system digital ports?
-Is the Power Supply barely warm or very warm/hot?
-Is the software card seated all the way in , and in the rear slot of the two?
=----(((((((((()----=
www.curlycord.com
Toronto, Canada
Add me to LinkedIN
RE: Call Pilot 100 Boot Fail
The card was in the front slot rolled it to the back and we are working!
Thanks!