SV8300: how do activate a new punch down on 66 block and identify it's extension
SV8300: how do activate a new punch down on 66 block and identify it's extension
(OP)
So upfront, I will tell you I'm just learning Telco on this level so please be patient with my Green-ness! I needed a new extention added to an office which has only 1 jack and 1 existing phone line to it. So, I used 2 of the unused pair to create a 2nd line. I then traced the wires to the correct place on the 66 block and then patched it to our NEC SV8300. Here is where I get lost. I'm told that I have to activate it in the SV8300 using PC Pro, but how do I identify that specific place on the 66 block and assign an extension to it?
I'm very new at this and would appreciate any assistance to get me going in the right direction.
Thanks
I'm very new at this and would appreciate any assistance to get me going in the right direction.
Thanks
RE: SV8300: how do activate a new punch down on 66 block and identify it's extension
RE: SV8300: how do activate a new punch down on 66 block and identify it's extension
On many old sites I did search for papers which were left by installers and was succesfull.
RE: SV8300: how do activate a new punch down on 66 block and identify it's extension
(STO933) - we do not have any documentation that I am able to find. Some of the punch blocks are still labeled as rooms that no longer exist. There was a remodel done years ago and apparently the labeling schema was never updated. ( or filed somewhere that would make sense lol)
RE: SV8300: how do activate a new punch down on 66 block and identify it's extension
010411 stands for Unit 01 (this PBX) Card slot 04 and Port 11 on the card.
They are in 4 pair groups so the 11th port would be the 3rd connector on the card. Look at that connector and see if you can identify the colored pairs from the wiring. You can follow that cable and it should show you the block you are connected to. If you could identify the colors on the connector you can now narrow down the pairs you need to test.
RE: SV8300: how do activate a new punch down on 66 block and identify it's extension
RE: SV8300: how do activate a new punch down on 66 block and identify it's extension