×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Pri sends "not ready" to telco every 15 minutes

Pri sends "not ready" to telco every 15 minutes

Pri sends "not ready" to telco every 15 minutes

(OP)
I have 2 pri's, the system is sending a not ready to telco via the d channel. telco then sends a reset.
Spans do not drop, active calls do not drop. New callers get a fast busy for approx 15 seconds.
Repeat every 15 minutes. G3v6i.03.1.230.6

RE: Pri sends "not ready" to telco every 15 minutes

Hardware platform?
(g3csiv6 is Prologics in compact modular cabinet e/w tn798 or tn2402 processor, g3siv6 uses processor tn790B or tn2404 and must use tn778 packet bus or x.25 and tn765 processor interface for the d-channels to work) tn778 is not used when tn794 or tn2401/2400 net/pkt board is used.

Any alarms in the Definity?


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
http://bshtele.com

RE: Pri sends "not ready" to telco every 15 minutes

(OP)
Not a Prologic.

Processor is a TN790 with a TN765 proc interface.

No alarms on the system, list measurement ds1 runs clean too!
Had a vendor meet and telco proved issue to pbx.
1 pri in pbx, and 1 connected to t-bird. The pbx pri "reset" the t-bird one did not.

I did order replacement boards, I will try the TN778 first.

RE: Pri sends "not ready" to telco every 15 minutes

tn765 x.25 d-channels use communication-interface links and communication-interface processor-channels.. isdn packet bus does not.
If tn778 packet bus is used and activated, it will show Packet Bus Activated? y on display system-parameters maintenance.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
http://bshtele.com

RE: Pri sends "not ready" to telco every 15 minutes

(OP)
Resolved.
TN790 processor was the issue.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close