×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

station 29 will not boot up

station 29 will not boot up

station 29 will not boot up

(OP)
I have a cics that has 8 working phones. when I try to add station 29 it will flash but not boot up. I have 18v on the next 8 ports. I have tried moving a working phone and get the same results. The system shows first 8 ports as 101 to 108 and next 8 ports as 117 to 124. I have not restarted the system yet. do you thing that would help.

Thanks

RE: station 29 will not boot up

I'm guessing that you are plugging into port 117?. I'm sure that this would by default be the 9th port.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: station 29 will not boot up

You have "restricted software" which is 4 lines 8 stations (4X8)

Get the system version (SP Code) in Maintenance then verify with the list here https://www.tek-tips.com/faqs.cfm?fid=6693 to see which one you have.

________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: station 29 will not boot up

We used to have this on the original Norstar Compact systems which were the good old 6+16 ones.

For very small sites, customers were sold 4+8 Norstar systems. Doing an upgrade from a 4+8 to a 6+16 was quite expensive all those years ago and it was really difficult to do on site to justify the costs.

All we did was to unplug the multi 8 port cable and replace it with the standard 16 port one. They were difficult jobs!. Ha-ha. Don't get them anymore.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: station 29 will not boot up

(OP)
I will be on site later this week and will check out the SP code. Is there unrestricted software that can be installed. I did connect to port 117

RE: station 29 will not boot up

"Port 117" is actually the built in ATA and is on the lines cable pair 20. You definitely have restricted software in my opinion. I think the ports go from 116 then 119 and so on to 126 on the station cable

www.linkedin.com/in/Phoneguy427

RE: station 29 will not boot up

"Is there unrestricted software that can be installed"

Yes but depending on your current software version depends on which software you need and if any extra sets are required so post that SP code for us when you get it.

________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: station 29 will not boot up

(OP)
The version # is 310A1IH03-NAT

RE: station 29 will not boot up

(OP)
I typed in wrong Version it is 30AIho3-nat

RE: station 29 will not boot up



As says here https://www.tek-tips.com/faqs.cfm?fid=6693 your version is 1.0, the first version created:
AI =CICS 1.0 NON-EXPANDED (4X8) H03

The latest is 7.1 with more features.
To get from 1.0 to 7.1 you needs to upgrade 3 times to keep your programming (phone side) so it's not worth acquiring those software's/upgrade tools.
Best to go straight to 7.1 and re-program the system from scratch.
The best/last: DH=CICS 7.1 STD IRAD-ON+AA PROG PROMPTS (SIP)(8X16/24) C12

You also need to worry about the voicemail system if there is or you may have compatibly issues.
To find version log into F983 then press 9, you can walk the client through that.

Otherwise try to search for 1.0 "Standard" software, power down, swap software, power up and wait.





________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: station 29 will not boot up

(OP)
I have ordered a replacement cics with 7.1. would using the memory card save any programming time or would it be better to start from starch.

RE: station 29 will not boot up

The memory card is the 1.0 software, it will not do you an good.

Did you make sure the new system will come with "standard" software and not "restricted"?

You only needed the software.

________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: station 29 will not boot up

(OP)
I forgot to respond to your suggestions. I have installed a replacement 4 x 16 unit and it is working fine.
Thank you all for your responses.

RE: station 29 will not boot up

Thanks for letting us know.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close