×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Coverage Remote Not Working

Coverage Remote Not Working

Coverage Remote Not Working

(OP)
I have a somewhat complicated scenario on a new install that isn't working.

Customer's main number rings to a VDN for a vector.

Option 1 transfer the call to a hunt group, with both coverage path and night service set up. There are no members in the hunt group.

The night service number is a VDN that calls an outside number, and that part works perfectly.

The coverage path for the hunt group rings a coverage answer group as point 1, another coverage answer group as point 2, and a coverage remote that references the same outside number as the VDN mentioned before.

The call routes perfectly until it gets to the coverage remove point. where a trace makes it look like it is going to call the outside line, but it never even seizes a trunk.

I also tried changing the 3rd point to the same VDN that the night services uses, but that also fails.

Any ideas?

RE: Coverage Remote Not Working

Do you get a denial message or somethign in the trace? Use instead of the remote coverage the same VDN in your coverage path which is workign for your outside call, does this work. TO use a VDN in the coverage you need to use v<VDN>.

RE: Coverage Remote Not Working

(OP)
I did try using the VDN. It didn't work.

I did a list trace tac so I could see the entire call. No denial message.

When using the coverage remote I see is accessing the route, it shows the first 7 numbers of the 11 digit number, never accesses a trunk and caller keeps hearing ringing.

When I use the VDN the trace shows it hitting the VDN, accessing the number, then for some reason it references the hunt group extension again, goes to the last step of the original vector and drops the call.

RE: Coverage Remote Not Working

If you are using a vector for this, dont send to a coverage remote, do " route-to number (all the digits you would use to dial the number from a extension, of the number you want to route the call to). with cov y, if unconditionally

RE: Coverage Remote Not Working

(OP)
The call has left the vector and is in a coverage path. Point 1 is one call answer group, point 2 is another call answer group, point 3 they want the call transferred out to that number.

I have another vector that just does the transfer out, and that is what is in the hunt group as the night destination. That works fine. When I program that vdn as the 3rd point instead of the coverage remote, it also fails.

RE: Coverage Remote Not Working

Do you have several locations with different trunks? Does the cov-r go out over the right trunk?

I suspect the problem based on your statement "...it shows the first 7 numbers of the 11 digit number..." rather in the correct allocation of the trunk.
In a similar case with one of my own, the cov-r always went out over the trunk in Germany instead of the trunk in the USA. A quick workaround was to create a new extension (not a virtual one) and assign the location fix to it.

Obviously it is of eminent relevance, that I this, what you celeprate, not optimally effective assume, since the integrate of you in the communicative system as code related terms with me no explosive associations in mental-empirical reproduction process of the mind.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close