×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Issue with Co lines

Issue with Co lines

Issue with Co lines

(OP)
Hi all hope you people are doing good
Well my issue is regarding ns500
As i have 2 co lines, i set the operator dialing on 0 and co access on 9, the operator dialing is working fine but when i press 9 to take direct co line there is no tone y? AS I installed the pabx and i did the rest programming all things are working fine except of this co access
Can any one help?

RE: Issue with Co lines

If you use CO1 and CO2 set CO3 to CO 6 to OUS mode

RE: Issue with Co lines

(OP)
Can u please clearify it

RE: Issue with Co lines

In default configuration all CO are in Trunk group 1.
When you dial 9 ( for CO access) PBX use first trunk group seting in 3.Group/1.Trunk group/2.Local Access Priority ( in yor case its is probably TG1).
If we use analog CO lines ( and CO lines are in same Trunk group) PBX first use CO line with higher physicaly nummber ( in yor case it is probably CO6, which is empty).
All CO lines that are not used you have to put OUS

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close