×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

How do I rest the user name/ password on an Avaya IP office 500 V2 rel9.0.2

How do I rest the user name/ password on an Avaya IP office 500 V2 rel9.0.2

How do I rest the user name/ password on an Avaya IP office 500 V2 rel9.0.2

(OP)
Hi Guy's,

I'm new to the Avaya. I was given one of these box's and have finally decided to look at it.

Is there anyway you can log in using the RS232 port and default the usernames & password.

I have managed to use the RS232 port to login and change the ip address but I can't get out of debug mode. What do I need to do that.
Also I was told to try AT-SECURITYRESETALL. Does anyone know if that works?

I generally work with Alcatel/Panasonic /Hybrex/ NEC/LG. Can anyone help me with this issue.

RE: How do I rest the user name/ password on an Avaya IP office 500 V2 rel9.0.2

Yes to all of the questions in your 3rd paragraph. Connect to the RS232 port, type the command as above and follow the directions on the screen then wait for the OK response that will tell you it's done.

RE: How do I rest the user name/ password on an Avaya IP office 500 V2 rel9.0.2

look in you tube for how to reset security settings for IP office. I remember I saw a couple of videos before. Also, If you do not care about the configuratuon and licensing installed in the IPO. You can use a paper clip or pencil and push and hold the reset button for 30 to 40 secs till The led in the back at sd card will start blinking orange. take out the pencil or paper clip and wait for around 3 mins while the IPO resets.

RE: How do I rest the user name/ password on an Avaya IP office 500 V2 rel9.0.2

I would pull the SD card and get a copy of config.cfg so you don't lose you ADI licenses. If you don't you will be stuck in Basic mode.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

RE: How do I rest the user name/ password on an Avaya IP office 500 V2 rel9.0.2

Hi pabx86

After you type try "AT-SECURITYRESETALL", did you get the MAC address?
enter the MAC address, then type "at-debug" and the system will reboot.
Then the password will go back to default.

BTW, how do you change the change the ip address if you did not login the system?

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close