Extension list are not appearing in remote pbx server 3

• Sep 17, 2019

2
• #2

Westi

Programmer

May 14, 2007

10,578

Ontario

on those releases you can check if you can read out the extension
<IP ADDRESS>/system/user/local_user_list
look if you can see the list from a remote location.
If not then it could be that this port is blocked somehow

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

Upvote 0 Downvote

• Sep 17, 2019

• #3

holdmusic34

Vendor

Dec 21, 2012

3,757

AU

Thought you were just a pretty face Westi. But there you go.

remembering Intrigrant 2019

 

Upvote 0 Downvote

• Nov 7, 2019

1
• Thread starter
• #4

rsv23

Systems Engineer

Feb 13, 2019

247

PH

I recreated the SCN to all sites and reboot. This resolves the problem.

 

Upvote 0 Downvote

• Nov 7, 2019

• #5

derfloh

Technical User

Mar 18, 2010

5,677

DE

I created a powershell script a while ago that gets the full user and group list of an IP Office SCN a while ago

https://blog.fwilke.com/get-ip-office-extension-list/

You can always adjust the script to pull the user list of a single system, if you need.

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

Upvote 0 Downvote