×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Delayed speach on SIP trunks
3

Delayed speach on SIP trunks

Delayed speach on SIP trunks

(OP)
I've got a RLS11 IPO with about 25 1408s and sip trunks. The basic issue is there is always a 2 / 3 second delay on calls. The firewall is a sonicwall that is maintained by another company. The internet connection is 100meg Ethernet leased line. I gave the IPO a public IP address and bypassed the firewall and there was no delay at all (I can't leave it like that so it is now behind the firewall again). Basically that's where my responsibility ends as it proved the firewall is the issue. As predicted the firewall maintainer is blaming the IPO. So, I'm pretty much stuck. I had the sip provider run some traces and they could see the sip packets were getting 'PAT' applied to them and port 5060 was getting translated. I did doffer up this info but didn't have much luck. We have confirmed with the traces that SIP ALG is not running. Does anyone have any ideas on where I could point the firewall maintainer?

RE: Delayed speach on SIP trunks

I have several IPO r11 behind a Sonicwall with SIP trunks and no issues. We’re Avaya and Sonicwall certified...

On the Sonicwall, have your IT provider:

1. Make sure SIP transformations are disabled.

2. Create an outbound NAT policy for the IP address of the IPO, and on the advanced tab of the NAT policy, place a check mark in “disable source port remap”.

3. Verify the audio ports on the IPO are wide open inbound on the Sonicwall from ANY source. This is not a security risk. This is audio only ports. Not 5060.

I wrote a guide for Sonicwall and IPO r9.1. It would be the same for r11. I’ll find it and put up a link shortly.

RE: Delayed speach on SIP trunks

(OP)
Thank you David, that is perfect. I'll let them know!

Cheers.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close