Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Automate the on-hook dialing on J100 phones 4

Status
Not open for further replies.

IamaSherpa

Instructor
Joined
Dec 24, 2015
Messages
523
Location
IT
Hello, some hundreds of J100 IP phones have to be implemented, the request is make the enbloc dialing (on-hook dialing) is configured automatically at setup, I had a look at 46xx file but it seems there is no command specified for that, have you ever faced that?
Thank you
 
It is an option in the user settings but it has no check box Manager. Best way is to create a user, register a phone, enable enbloc dialing in the phone's menu and export the user as a template. Now you can create hundreds of users in one step through CSV. Looked for the Excel file in your Manager folder.

Need some help with IP Office? CLI based cale blocking: SCN fallback over PSTN:
 
They (Avaya) can as enbloc dialing is the default assumed by phones attached to the Containerized IP Office systems we're trialing. How they do it is a different question. My quick hunt just now didn't turn up any obvious setting.

Stuck in a never ending cycle of file copying.
 
Derfloh, the device settings are not included into the users one, I wonder how you do that
 
en block dialing is a parameter in a full configuration csv export, so it is not really a User setting, although the User can toggle it from their phones. Set a phone to enblock, then pull a fresh configuration, and export that user as a template and you should be good.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top