×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

ComWin (connection rejected by transportservice, check transpoirt service name)

ComWin (connection rejected by transportservice, check transpoirt service name)

ComWin (connection rejected by transportservice, check transpoirt service name)

(OP)
hi ;

we have a hipath 4000 (duplex / DSCXL2) that was working correctly, we had only the problem of SLES Linux blocked until today we can't access to the comwin as you could notice in the joined photo in the assistant page we have the message "unbale to connect to RMX ".
any help, please. may I reboot the system without problems.

best regards
Okacha


RE: ComWin (connection rejected by transportservice, check transpoirt service name)

Does it work if you open through Expert Mode, Hipath 4000 Expert Access. It should do. Then close everything and try again, direct from Comwin.

RE: ComWin (connection rejected by transportservice, check transpoirt service name)

(OP)
no, it doesn't work if I open through Expert Mode, Hipath 4000 Expert Access

RE: ComWin (connection rejected by transportservice, check transpoirt service name)

Looks like a problem with ADP then, as the Assistant homepage is not showing any license info and also needs an upload, looks like it can't run any AMOs, it can't connect either.

I would reboot the Assistant from Base Admin/Webmin, and restart the ADP (from Portal, System, Front Panel). That's from memory, it's there somewhere so have a look around.

RE: ComWin (connection rejected by transportservice, check transpoirt service name)

You should be able to connect to the ADP via telnet on the Atlantic LAN.
Connect via ssh (using PuTTY for example) to the OS4k Assistant, and run from there
telnet 192.0.2.3
After inputting the credentials, run
TSN;
You'll get a list of active connections, if you see 12 connections for logical device FBT, it means the FAMOS connection limit was reached. You can either stop them (but then you have to find the applications that opened the connections in the first place - like ComWin, Concierge) or you restart the ADP:
exe-rest:unit,a1,soft;

If there are not so many connections open, then it could be that FAMOS got deactivated, so just run
act-famos:famos;

RE: ComWin (connection rejected by transportservice, check transpoirt service name)

(OP)
thanks george
yes i could connect to ADP via telnet
<TSN;
TSN | NOUN | LOG DEV | TIME | USER
------+-------+---------+----------+----------
5596 STTAB TASK 13 53 28
4808 USER * 11 23 47 ROOT
if I execute exe-rest:unit,a1,soft; does telephony still working or it willbe shutdown

RE: ComWin (connection rejected by transportservice, check transpoirt service name)

Try first act-famos:famos;
If after this you still cannot connect with ComWin, then restart the ADP.
You have a dual system (ADP and SWU running in separate machines), so an ADP restart doesn't impact telephony, but CSTA applications (like OSCC, UC, DTB, BLF) will be (shortly) disconnected.

RE: ComWin (connection rejected by transportservice, check transpoirt service name)

(OP)
thanks george

I had execute act-famos:famos; and it work ; then I had execute an uploud ( Click CM, Network, System, Search, then Action, Upload )and its synchronous, I have only the problem of logical backup



thanks again
best regards

RE: ComWin (connection rejected by transportservice, check transpoirt service name)

Ok, this means that FAMOS was locked - if it was done by the system, then you should see in the Hista a related advisory. Also, there is a V6 R2 patch that prevents the automatic blocking of FAMOS, included in RMX-HF11 for V6 R2.17.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close