We have a customer who has a remote IP Office which has no trunking. This site connects back to their environment via Session Manager. The global dialing and everything works great. Calling in and out works good. There was a Nortel Option 81, which we allowed the IP Office to dial off, via some access codes, which used the RDB access code. They have since closed this office with the 81. I am not trying to have the IP Office dial off the Aura system. If I can't I will simply voice network this location to another, and dial off that locations PRIs. But I am hoping I can build access codes in the Aura/SM to allow other sites to leverage PSTN dial tone as needed. I do have an access code say 3333 which allows us to dial out the same as 9. But even with dialing rules in the Routing table and the proper entities, but I can't seem to pull this off. If someone has had some experience or knowledge in this, would be great. Would even pay for assistance as this has become an issue for this customer.
IP Offices is RLS 9.1
Aura is 7.0.1
System and Session Manager are 7.0
Red Flag Submitted
Thank you for helping keep Tek-Tips Forums free from inappropriate posts. The Tek-Tips staff will check this out and take appropriate action.
Reply To This Thread
Posting in the Tek-Tips forums is a member-only feature.