×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

TDE600- SENSOR TO ICD GROUP CALL

TDE600- SENSOR TO ICD GROUP CALL

TDE600- SENSOR TO ICD GROUP CALL

(OP)
We have a customer with a TDE600, there is a option card with sensors installed.
We have door reed switches connected to the sensors.
The idea is after hours when a door is open, the wireless handsets (10 of them) should all ring at the same time and display what door is being opened.
If the call is not answered, we need to ensure that it is logged on the wireless handset.

Currently we have been given the following workaround:

1) Door is opened
2) Analog extension is tripped and looped into a CO port (physical connection)
3) CO port is set to an ICD group
4) The wireless handsets display the line # and ICD group name
5) THE CALL IS NOT LOGGED IF MISSED OR ANSWERED
I’m being told that the call is not being logged as there is no call display information being sent over. However the analog extension is setup with the doors name.

I don’t under stand why the sensor does not provide an option to dial a ICD group directly, however the door phones allows this.
Can you please help us think outside the box for any other solutions?

RE: TDE600- SENSOR TO ICD GROUP CALL

There is no way to get the sensor to call a ucd group. You’re work around is probably the best way. I had that issue and had to strap all 4 sensors input to trigger 4 phones as I did not have an analogue line card

Where are you trying to log the call. If it calling a group through the slt to the CO you could have a missed call log key for that group on the phones

If on a call loggers you should be able to report from the co/icd group

RE: TDE600- SENSOR TO ICD GROUP CALL

(OP)
So the wireless DECT handsets should have a log of the missed ICD group call?
Can you provide some instructions on were to find them? We spent countless hours so far on this !!

Also, you had a reply on the below post regarding coils, is this something you tested or can provide more clear instructions?

https://www.tek-tips.com/viewthread.cfm?qid=179471...

THANKS !

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close