Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Merlin Magix 016 T/R Static and Programing Extensions

Merlin Magix 016 T/R Static and Programing Extensions

Merlin Magix 016 T/R Static and Programing Extensions

I've seen some older posts on here in regards to a static issue on the Magix 016 T/R board and I have that problem....Has there been any solutions to that issue?
I have a Magix Rel 3.0 V7.0 and 016 T/R board #617F34 108514183, I've tried the power replacement and moving the board into a different slot with no luck, still static.

Also, I'm using WinSPM R9.0 and when I go into Telephone Programming for the extensions I have on the 016 T/R board, it shows the old ATL-34 programming/display. Very confused about that since I didn't think the old ALT telephones were supported on Magix. I remember reading that you were able to select a ringer equivalency, pulse dial and other things for programming T/R lines, but that isn't even an option.

RE: Merlin Magix 016 T/R Static and Programing Extensions

Back it up and do a board renumber. Are you programming in the Standard SPM or Quick Access? Even though it is a single line telephone, it programs as if it has 32 buttons, so you can assign lines and features to it. Sorry, don't have a solution for static except to move to a different port, or replace the card if it is all ports on the card

RE: Merlin Magix 016 T/R Static and Programing Extensions

Agree with TTT. Switch ports or replace the board. 🙂

I love2 "FEATURE 00"

RE: Merlin Magix 016 T/R Static and Programing Extensions

Thanks for the info....I'm programming in Standard SMP and Quick Access. For some reason there are things I can do in Standard that I can't do in Quick Access. I've programmed Definity G3 systems a while ago and this is my first time with Magix....very different.

I've looked around and found a few board repair shops ranging from $50 to $75 for the 016 T/R....new/refurbished ones are up there in price...I'll probably pick up a refurbished 016 ETR board since I only need 5 or 6 standard T/R ports. I haven't done my research, but am I correct to assume the 6 ports on the 016 ETR do the same functions and programming as the 016 T/R board?

RE: Merlin Magix 016 T/R Static and Programing Extensions

6 ETR ports can be configured as T/R. Remember to execute a Board Renumber and reconfigure up to six ports as T/R after swapping the boards.

I love2 "FEATURE 00"

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close