Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Area Code being stripped on CID, Recipients End. 1

Status
Not open for further replies.

dsm600rr

IS-IT--Management
Joined
Nov 17, 2015
Messages
1,448
Location
US
Hello all,

I have a client with a IPO at their main location with remote locations connected through a VPN.

One of their remote sites is experiencing their area code being stripped on outbound calls on the recipients end.

All of the extensions have the same 8N Nsi short codes under "User" > "Short Codes" and they are all programmed exactly the same (obviously the TN is different depending on the location) - however only one remote location is experiencing issues with the area code being stripped on the receiving ends CID, for all of their extensions.

Any ideas? I captured a trace when I had them make a few test calls.

Tek-Tips_zsvpgm.jpg
 
Do you have a prefix on the PRI settings? I had this happen and had to append the outgoing callerID to include the extra digits that are in the prefix.
Mike
 
teletechman: Interesting however that worked! Star for you :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top