×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

IPO R11 Ground Start Trunk Issue
5

IPO R11 Ground Start Trunk Issue

IPO R11 Ground Start Trunk Issue

(OP)
I just installed an R11 IPO with an ATM16 expansion module to support the ground start trunks. Inbound is no issue but the system is very picky as to which lines can be used for outbound, and overnight seems to somehow now have less lines that can be used for outbound calls.

Both units are grounded and all trunks are set to ground start, but only 4 out of 16 trunks seem to provide dial tone where as the others give a waiting for line error.

I'm pushing the customer to get away from the ground start trunks ASAP but wondering if there is anything else I may be unaware of.

RE: IPO R11 Ground Start Trunk Issue

2
I dont see many ground start anymore but you can try flipping the polarity on them. see if it helps.

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Vive Communications

RE: IPO R11 Ground Start Trunk Issue

Put your test butt on the lines and check the polarity is the same fir all lines.

Then keep the polarity the way right up to your last termination point .

RE: IPO R11 Ground Start Trunk Issue

I had this problem in the past. Its the polarity. They are not always the same. Do test as snowman says.
Swap polarity on the non-working lines.

If vegetarians love animals so much, why are they eating all of their food?

RE: IPO R11 Ground Start Trunk Issue

Seems 3 people think it is polarity

ditto which makes it 4 smile

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

RE: IPO R11 Ground Start Trunk Issue

(OP)
Thank you so much! Once the crosses were reversed the lines picked up as expected.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close