Magix single line phone question
Magix single line phone question
(OP)
Hi,
Does the Magix system have a feature that allows a single line phone ext to dial out on a specific out side line depending on the situation. For an example, I have VOIP for lines 1 and 2 and blue tooth cell adapter on line 3. Some times I need to access line 3 and other times line 1 or 2.
Basically allowing the user to specify which line to dial out on the single line phone ext.
I think the Panasonic KX-TD816 has a feature like this..
Thanks
Does the Magix system have a feature that allows a single line phone ext to dial out on a specific out side line depending on the situation. For an example, I have VOIP for lines 1 and 2 and blue tooth cell adapter on line 3. Some times I need to access line 3 and other times line 1 or 2.
Basically allowing the user to specify which line to dial out on the single line phone ext.
I think the Panasonic KX-TD816 has a feature like this..
Thanks
RE: Magix single line phone question
RE: Magix single line phone question
When I chose pools in the system programming it beeps so its not enabled or will not work in key system mode. Now I am wondering if I switch to hybrid/pbx mode would do to the system.
Thanks
RE: Magix single line phone question
Suggest you back up the programming to the PCMCIA card first, then change modes, see if it meets your needs, if not you will be able to go back to key mode and restore.
RE: Magix single line phone question
While I was playing around with it, it looks like you can only add one line to a group and not 2 lines.
Brian