Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Welcome Message on NS500

Welcome Message on NS500

Welcome Message on NS500

I need to upload and activate a Welcome message for incoming call.
Can someone help me?
Thank you.

RE: Welcome Message on NS500

Do you mean just a message that is played then goes straight to a hunt group or something like an auto attendant that requires an input from the caller?

RE: Welcome Message on NS500

I mean a simple message,
example: "Welcome to Tek Tips". After this message the call is routed to an extension.

RE: Welcome Message on NS500

Okay, that is fine,
First you will need to record an OGM message, if you go into;
Optional Device > Voice Message > DISA Message , then you will be presented with a list of OGM's, Choose which one you want be sure to label it though! , for example if you choose 507 (OGM/DISA 07).
Once you have chosen your message dial *36 1 507 (or whatever one you chose) and record the message, press dial store to save before putting receiver down.
Once recorded you will then need to create a queuing time table, This is Group > Incoming Call Group > Queuing time table, here make the first sequence your OGM 07 or whichever you chose, then make your next sequence "Overflow".
Next make a hunt group which is is Group > Incoming Call Group > Group Settings , make a dummy hunt group here, call it "IncomingMSG" or something, then go into the tab "Queuing time table" and assign your queuing time table you made.
Next stage go into the tab "Overflow queuing busy" and "Overflow no answer", there input the destination of where you want the calls going after the message.
I hope this makes sense, I know it seems like a lot for such a simple thing.

RE: Welcome Message on NS500

Thank you very much for your help!
Can I upload wav file or I can only register?

RE: Welcome Message on NS500

Yes you can upload a WAV if you prefer,
This is done in maintenance mode (the little hammer), it's message PC > PBX , the message number ties in with the OGM number
IE message 7 - OGM 7
Use internet explorer for this

RE: Welcome Message on NS500

Thank you so much.
Now I'm going to try your suggestions!
Thanks again

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close