Cressplant
Technical User
Hi,
I was experiencing problems with my HP Officejet 7612 after installing off-brand cartridges and the built in printer head cleaning function wasn't sufficing so I removed the print head and cleaned it manually. The process seemed to work so once it happened again I repeated the process but this time when refitting the cables at the back of the print head one of them frayed.
Does anyone know where I might be able to find these specific cables:
WINKIN E230343 AWM 20624 80C 60V VW1
It needs to have a 24 (hard to tell due to fraying) pin connector ideally around 30cm in length. I'd also like to source the same cable with a 12 pin connector in case the other cable is damaged.
I've contacted HP which hasn't been very fruitful, there are seemingly lots of similar cables online but does anyone here possess the knowledge as to which one will fit this printer model?
Any suggestions would be massively appreciated, thank you!
I was experiencing problems with my HP Officejet 7612 after installing off-brand cartridges and the built in printer head cleaning function wasn't sufficing so I removed the print head and cleaned it manually. The process seemed to work so once it happened again I repeated the process but this time when refitting the cables at the back of the print head one of them frayed.
Does anyone know where I might be able to find these specific cables:
WINKIN E230343 AWM 20624 80C 60V VW1
It needs to have a 24 (hard to tell due to fraying) pin connector ideally around 30cm in length. I'd also like to source the same cable with a 12 pin connector in case the other cable is damaged.
I've contacted HP which hasn't been very fruitful, there are seemingly lots of similar cables online but does anyone here possess the knowledge as to which one will fit this printer model?
Any suggestions would be massively appreciated, thank you!
