×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Connected Blind Call.......

Connected Blind Call.......

Connected Blind Call.......

(OP)
when someone call to office number and after run auto-attendant transfer to user....if user is not answer and outsider hangup phone....then system status appear connected blind call and user end is still ringing until user pickup phone.

we are not using voice Mail....

RE: Connected Blind Call.......

Are you using analogue lines.
Check your disconnect clear times

RE: Connected Blind Call.......

(OP)
Yes we are using analogue line and disconnect clear time is 500ms , ring persistence = 400ms , ring off max = 5000

RE: Connected Blind Call.......

Your setting needs to match the provider's setting.

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

RE: Connected Blind Call.......

I suspect they don't have it turned on. Also make sure you turn on busy tone detection, that should clear calls down in disconnect clears absence though not as fast, it takes a good few secs smile

RE: Connected Blind Call.......

Set your disconnect clear time to 360.
You usually need to be all east 140 less than the provider

RE: Connected Blind Call.......

(OP)
Still same problem after set 360 clear time......

RE: Connected Blind Call.......

Have you checked how/if the provider has it set? Pointless otherwise smile

RE: Connected Blind Call.......

Amriddle01 told you to do, turn on busy tone detection on.

RE: Connected Blind Call.......

(OP)
Thanks it's worked fine after change busy tone detection with single frequency as amriddle told me.(incoming call connected with transferred user by operator).

But incoming call via auto-attendant to operator/user have still problem.....if operator/user not answer (continuously coming bell even outsider disconnect a call.

status: current state : holding other party on call: Auto Attendant Name


RE: Connected Blind Call.......

Then you'll need to make sure the provider has it turned on and ask them what their timer is, we can't help you with that, you need to call them smile

RE: Connected Blind Call.......

(OP)
I got it solution....(Disconnect Clear Time)

after change busy tone detection with single frequency. it's worked for transfer user but for outsider caller via Auto Attendant i changed in AA -> Action from Normal transfer to transfer option then it's worked fine now for both side...internal call and external call.

Thanks for all

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close