Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Best mouse for AutoCad
- Thread starter GMgerry
- Start date
TCARPENTER
Programmer
Hi GMgerry,
In my experience, usually any wheel style mouse is fine for AutoCAD. I'm not sure any of the 3D input devices are really warranted for AutoCAD - but I've never used one so I'm not sure how much benefit you'd get with one.
Monitors always top my list - the bigger and flatter the better.
Top notch graphics cards are always helpful when driving those large monitors.
Raw horsepower and loads of memory are never a bad thing either.
Just my 2 cents.
HTH
Todd
In my experience, usually any wheel style mouse is fine for AutoCAD. I'm not sure any of the 3D input devices are really warranted for AutoCAD - but I've never used one so I'm not sure how much benefit you'd get with one.
Monitors always top my list - the bigger and flatter the better.
Top notch graphics cards are always helpful when driving those large monitors.
Raw horsepower and loads of memory are never a bad thing either.
Just my 2 cents.
HTH
Todd
- Status