Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need AutoCAD R14 ADI Drivers for GTCO CalComp DrawingBoard VI

Status
Not open for further replies.

technobia

ISP
Sep 8, 2005
53
0
0
US
My 88 year-old father wants to use his old AutoCAD R14.01 with his Drawing Board VI Digitizer. He has a 16 button puck and custom menus defined. I have all his custom files in the SUPPORT directory.

I have successfully installed R14 in Windows 7.0 XPMODE using a USB to RS-232 emulation software. I have the GTCO CalComp TabletWorks v.10.09 installed and it is recognizing the tablet but there is no ADI driver in the pointer configuration inside AutoCAD. I have tried the WinTab v.4.1 (I think it is 4.1) but that does not work.

Does anyone out there have the R14 ADI drivers for his digitizer?

I used to be a CAD administrator from R10-R14 but it has been over a decade so I could use a brief instructions on how to install the ADI drivers.

Any help would be most appreciated!:)

Thanks,
Jody
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top