×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Unable to Receive Raw Data

Unable to Receive Raw Data

Unable to Receive Raw Data

(OP)
We have a Definity system 75 Generic unit.
We use to monitor all the calls with a remote pc connected to the rear panel of the switch, in the communications port, using Hyperterminal software.

Recently I noticed nothing coming out of the port.

Is there a command I can use to test the port or to reactivate it?

Thanks in advance
Paul


RE: Unable to Receive Raw Data

Do a 'st cdr'.  That should tell you if your link is up.  

RE: Unable to Receive Raw Data

pb111,
You need to first define the 'eia' port as the primary cdr output in the "ch sys cdr" parameter with baud rate '9600' alsoonce this is configured the 'st cdr' should show you the link state as 'up'. if not, run the 'test cdr pri' command & see which test is failing if it is test n. '215' check for the connection or the connecting cable.
That should be all you would require to capture the raw data of CDR.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close