×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

How to add a T-1 and DNIS into G3si?

How to add a T-1 and DNIS into G3si?

How to add a T-1 and DNIS into G3si?

(OP)
We have 4 voice T-1's passing DNIS information to our Application Server thru CTI Link. The configuration was set up by our vendor when we got the PBX. Now we need to add one voice T and some DNIS into the G3si. Would appreciate any information on guiding me to add another T-1 and some DNIS into our PBX through DSA.

RE: How to add a T-1 and DNIS into G3si?

Display an existing extension that goes to your VRU "display sta {extension}".  This will tell you what DS1 board the existing VRU ports use. It will be the first 5 characters of the station location, IE: 01a0512 would be DS1 board location 01a05. Display the DS1 board setting to determine what the framing and coding is on the T1 "display ds1 {board location)".  Print or write down what the settings are on the existing DS1 board, framing and encoding are set here. Then use the command "add ds1 {board location}to add the new board.  Again make sure you use the same settings as your exisitng T1's you wrote down above.  After you have added the board, add the stations using the "add sta {extenison}" command.  The station type should match what your exising stations are.  I suspect it is DS1FD, however it may be DS1SA, 2500 ......     But who knows!  

Hope This Helps

Chris

RE: How to add a T-1 and DNIS into G3si?

I forgot to mention, DNIS would be setup as a station on you switch.  So if they were sending you DNIS 1234, you would need an extension 1234 to answer the call.  If you want multiple calls to be answered then the station would most likely be in a hunt group, and the hunt group number would be the number called.  To check if you existing stations are in a hunt group use the command "list usage sta {extension}" and it will tell you what hunt group it is in, if any.  What you want the new ports to do could be a further discussion but this should get you started.

Thanks

Chris

RE: How to add a T-1 and DNIS into G3si?

(OP)
Chris, thanks a lot for your helpful input.

Chuck

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close