TVS75 blinking power light TVS75 blinking power light humhero (TechnicalUser) (OP) 13 Sep 05 00:11 does the sequence of blinks mean anything? i am having trouble getting my kx-t123211d to recognize my voicemail. RE: TVS75 blinking power light cwc3 (Vendor) 13 Sep 05 17:16 it means that you have not recorded your custom dialingmenu.and also means no dpits integration.is this a new installation?did you enable inband signalling,voice mail port programing ,hunt goups for voicemail ports,follow on idprograming on ext's and forward busy/no answer to your lead voicemail ext. RE: TVS75 blinking power light humhero (TechnicalUser) (OP) 14 Sep 05 12:57 previously i had a tvs50 hooked up to the kx-t1232, now i am hooking up the tvs75 and thats where i ran into the trouble of communication between the two boxes. RE: TVS75 blinking power light cwc3 (Vendor) 14 Sep 05 19:16 the 75 is easier than the 50 to get goingnow that I think about it a blinking light canalso mean your have not set your port service!! RE: TVS75 blinking power light cwc3 (Vendor) 14 Sep 05 19:17 what kind of trouble communicating are you having? RE: TVS75 blinking power light BTBZ (Vendor) 15 Sep 05 05:37 Blinking light on the TVS-75 mean that the two is not link. Program your KSU 1232 for VM Link. You may also need to ran your VM set-up. RE: TVS75 blinking power light cwc3 (Vendor) 15 Sep 05 12:46 thats not what it means when you are doing inband sinaling thats for apits/dpits . all he has a quick setup for the kx-t 1232 ands set his port service for voicemail using custom prompt one record theprompts. set cos for user 1 prompt one and the flashing will go away the tvs has no idea that it is pluged into the the 11D RE: TVS75 blinking power light shardian (Programmer) 18 Sep 05 19:02 I've also found with the VPS's that if they lose power briefly, when power returns they don't fire up properly and the red LED will flash until you turn the unit off for about 5 seconds and reboot. RE: TVS75 blinking power light humhero (TechnicalUser) (OP) 20 Sep 05 03:08 i have the tvs75-kxt1232 system set up exactly the same as my other tvs75-kxt1232 system that works. the only difference is, when i dial the voicemail extension on the new system the tvs75 never picks up on either port. thats the communication problem i am having. how can i record the prompts if i cant access the tvs75 through the kxt1232? shouldnt the default prompts work? RE: TVS75 blinking power light cwc3 (Vendor) 20 Sep 05 07:57 you better default that unit and read the book and do a quick setup for the proper system!