×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

IP 5550 with v6.0 software

IP 5550 with v6.0 software

IP 5550 with v6.0 software

(OP)
Just installed an IP5550 onto the 33MX.

The software inists on looking for the first MX on 192.168.1.2 before then trying the site installed MX on 192.168.4.2.

Although it trys the right one on the second attemp, it doesnt tie up with the system.

If I edit the .cfg file within the Mitel folder and put 192.168.4.2 as the first MX, it then works.

BUT, Only untill a reboot, and then it looses it again.

Anyone seen this.

UK Technical says that they've seen it before and if I go in and out of the software 5+ times it will all of a sudden kick in and work......it hasnt.....:O(

Tim

RE: IP 5550 with v6.0 software

Hi Tim,

Well i install 3300 in the UK and I had the exact same problem just 3 weeks ago and had Mitel UK totally baffled.  after a host of tests and changes i just rebooted the system.  The main change i did was with the cluster element ID's as they were all incorrect.

However if you have 2 IP subnets I am guessing you are clustering a couple of controllers or you have changed IP addresses on the controller.  If you are clustering revise your Cluster element ID's and another rule of thumb would be to give your 5550IP console a static IP address if you havent already done so.

Ian

RE: IP 5550 with v6.0 software

i also had the same prob in the uk but was on a 5.2 site with a flat network, first icp  134.199.0.1 second 134.199.0.3......couldnt get the 5550 to log on to the primary icp no matter what we did,the clients IT people re imaged the 3 pcs and then it worked straight off...regestry issue may be...?
Was is a clean instal...?

RE: IP 5550 with v6.0 software

(OP)
Turns out that ever time I was comming out of the console, it was reconfiguring the cfg file in the mitel folder, got to a point where it was deleting it????? <no, I dont know either>

I had to make it read only to everyone and it works, in any Windows XP roaming profile that logs on.

I must admit, somewhere along the lines I did reboot the 33mx so it could always be sorted.

Console is now in action so I dare not play with it for a abit.

If I get a chance, Ill try the suggestions.

Cheers Chaps

Tim

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close