×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

OutBound ISDN (NI2)

OutBound ISDN (NI2)

OutBound ISDN (NI2)

(OP)
Hello,
i am working with Voice Recognition Units using Dialogic JCT480 digital boards.  These VRU's w/JCT480 accept several digital protocals inbound and answer calls for me.  I have an idea i am trying to iron out but have several questions.  
     For this discussion I am making the assumption that the Definity has an external PSTN connection and an internal user interface connection.  I would like to connect one of my VRU's to the definity either between the PSTN and the Definity or in parallel to the PSTN so as not to interfere with incoming or outgoing traffic through the Definity.  I would like the VRU to accept incoming calls (CONTINOUS CONNECTIONS) from the Definity using ISDN (NI2)on half of its ports.  I would like the VRU to be able to initiate outbound calls to the Definity using the same ISDN (NI2) protocal using the other half of its ports.  This will tie up a fixed number of ports on the Definity for outbound to the VRU and a floating number of ports for inbound from the VRU.

1.  If i wanted the Definity to connect and initiate a call from its external connection directly to my VRU using ISDN (NI2) is this possible and how?
2.  Could that same ISDN connection from the Definity to my VRU be a continous connection that would last 24hours plus?
3.  Do i need additional equipment to allow the ISDN (NI2) protocal connection?
4.  If ISDN (NI2) is not a protocal that definity can work with are there any ISDN protocals it will work with?

If any part of this is possible my next question would be, is there any way to create a 2 peice digital set (independant speaker and microphone w/o dial pad) where the microphone would be continualy listening during the continous connection i mentioned above?

I thank you all in advance for any insight or advice that you will share with me.

Manuel

RE: OutBound ISDN (NI2)

To add ISDN you do several steps in the Definity to make it work.
1. Add T1 protocol setting, csu type. etc
2. Add the trunk group
3. Add the Signal group
4. Add the trunk group members
(Just an example)

When you add the T1 to the Definity make sure you set the protocol type as "a"(a is NI2)in the add ds1 {board loaction} form.

Chris

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close