Zoned and all zone paging question

[linhawaii]

Hi all,

Here is my situation:
4 locations, all connected. They have seamless extension to extension calling....
- 2 locations IP406 V.2 4.0
- 1 locations IP406 v 3.2.54
- 1 locations IP403 v 3.2.54

I need to be able to page all locations at once. These are water filteration plants and for disaster planning they need to be able to page all locations simultaneously.

Currently, I have each location with local paging and the ability to page to another plant one at a time, but I need simultaneous.

Ideas? Thanks in advance.

 

[mforrence]

Easiest is external paging using something like Valcom's paging over IP. I don't think that even the new advanced networking software supports paging across SCNs
Mike

 

[PlatinumGuy]

I can confirm that you cannot page across an IP trunk in this manner.

You can page across an IP trunk to a paging group on another system but not simultaneously to different paging groups on different systems.

 

[Gibsonic]

i recall someone posting before that they were able to do this using VM Pro as a "catch and release" type setup.

Basically have a shortcode point to a VM Pro module that using the "edit play list" function to record(re-record) the message to be paged.