Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

xp pro bypass boot id/pw

Status
Not open for further replies.

defreib

IS-IT--Management
Oct 15, 2003
138
US
I just received a used pc running windows XP but when I boot up it prompts me for an id and pw which I don't have. Is there a way to bypass this prompt on boot up?

Thanks in advance
 
Is it windows asking for the ID and Password or the BIOS? If it is the BIOS then go into the BIOS and note the settings for your HD and then there should be a jumper on the motherboard to clear the BIOS CMOS ram. That will also clear the password. How old is this machine that is running WinXP?

HTH RuralGuy (RG for short) acXP winXP Pro
Please respond to this forum so all may benefit
 
After I boot up it says press control alt delete, then press OK, then it asks for id and pw.

not sue how old, maybe less then 2 yrs.

thanks



 
See if the Administrator account has a blank password. Type Administrator in the user box and leave the password field blank and press enter. If this is XP Home you will have to boot into safe mode to access the Administrator account. If this will let you into the OS, then you can change the passwords of the accounts or turn the password protection off.

Joey
A+, Network+, MCP
 
did not work, that would of been too ez

anybody ever here of killcmos.exe, would that apply here?
 
That does not apply here. That utility is for resetting the BIOS password. You are now looking at reinstalling Windows or using a 3rd party recovery tool which may cost you some money.

- Windows Key


(looks like there is a free demo on here, but don't know how much the demo will actually do)

Joey
A+, Network+, MCP
 
This happens to me about 1/2 the time, I use locksmith from Winternals ERD disk
 
thanks guys for all your suggestions, i figured out the id and pw....now how do I bypass this going forward?

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top