XMOBILE Configuration Help

[surplus]

I've not been able to find anywhere the procedure for setting up an Xmobile station. I can set everything up, except the destination number of the cell phone. What is the name of the table that the cell phone goes into?

Version G3V9i 02.0.033.2

 

[NX01]

http://support.avaya.com/elmodocs2/multivantage/233823_2/100500_4/100500_4.pdf

When you add a xmobile station it should look like this:
STATION

Extension: 2222 Lock Messages? n BCC: 0
Type: XMOBILE Security Code: TN: 1
Coverage Path 1: COR: 10
Name: Test cell Coverage Path 2: COS: 1
Hunt-to Station:

STATION OPTIONS

XMOBILE Type: EC500 Message Lamp Ext: 2222
Display Module? y Message Waiting Type: NONE
Display Language: english Length of Display: 12x3
Mobility Trunk Group: ARS Calls Allowed: all
Configuration Set: 1

CELL PHONE NUMBER MAPPING
Dial Prefix: 1
Cell Phone Number: 1112223333
Mapping Mode: termination

Page 3


ABBREVIATED DIALING
List1: List2: List3:

HOT LINE DESTINATION
Abbreviated Dialing List Number (From above 1, 2 or 3):
Dial Code:

Line Appearance: brdg-appr Btn:1 Ext:1234




In the future everything will work...

 

[surplus]

I'm not seeing all that you have on your screen, however I can add an XMobile station. What features would that give me at Version 9? The fields I'm not seeing are "Cell Phone Mapping", which led me to believe there was a table somewhere....

 

[NX01]

GAH! I didn't see V9 in your post. You may be on EC500 v.1 V2 they implemented the Cell phone mapping..

In the future everything will work...

 

[surplus]

Emphasis on the "In the future everything will work" eh?

What does the XMobile feature give me in v1? Anything useable?

Thanks NX01

 

[NX01]

My signature is my excuse for everything...In the future. If you can find a v1 EC500 Admin guide it may be the key. I could only find V2 and above on the Avaya Site.

In the future everything will work...

 

[nohuhu]

surplus,

xmobile in r9 can be not ec500 but dect integration used in european market. you u.s. guys are lucky having your native transtalk and everything, we europeans have to deal with dect and its kludgy implementation from avaya.
also it can be some another kind of off-pbx integration, something called sscan or like that.

 

[surplus]

The mystery is solved. Thanks a million dwalin and NX01. It was misleading to see that I could add an Xmobile station but couldn't find any way to map it to the cell phone.

 

[ChicagoPBX]

I don't use XMobile anylonger. I have been using EC500. If you use change off-pbx-telephone station-mapping XXXX, you don't have to use the dummy extensions for XMobile.