Windows Embedded CE 6.0 R3 - Recovery Button Procedure
Note: This procedure is based on BIOS Version Q1000g. Future BIOS
Versions may require the entry of a password to start the recovery.
1. Power off the workstation.
2. Remove any USB Thumb Drives or ‘Sticks’ that may be attached to the IO
Panel.
3. Power-up the workstation using the power button.
4. Observe the screen and use a paper clip or similar object to push the
Factory Restore button when the Blue BIOS splash /w MICROS logo
screen appears.
• The workstation restarts, displays the Blue splash screen then:
“Factory Recovery In Process - Please Wait”
• The procedure takes about three minutes including CF card formatting.
• The workstation restarts when the process is complete. See the next
page for more information about WINCE factory recovery.