Wrong ACL applied help

[Flyers01]

I have a 3550 with Version 12.1(22)EA4 with ssh enabled and no ip http
The wrong access list was applied to it now I can't ping or ssh into the switch
Is there a backdoor or something that I can try.
Tried to reboot already wr mem
thank you

 

[vipergg]

Nope your only way in if an acl is blocking your vty lines is going to be at the switch thru the console port.

 

[burtsbees]

The "ip access-class" command is what applies an acl to the vty lines, noty "ip access-group", don't forget. Are you sure it's an acl? Are you sure ssh is enabled in the switch (crypto key generate rsa, ip domain-name local, username bla priv 15 pass FUBAR)?

Burt

 

[Flyers01]

Yes ssh is enabled Yes it is a ACL.

 

[burtsbees]

What does the acl say? How is it applied? Is it applied to the interface or the vty lines?

Burt

 

[Flyers01]

It applied to the interface vlan 1
example
ip address of switch 10.10.10.10 255.255.255.0
acl applied
access-list 100 permit ip host 10.11.11.1 host 10.11.11.10

 

[burtsbees]

That won't matter if you're telnetting in.

Burt