Windows Blue Screen and then system reboots all the time??? HELP?? 1

[masterm]

I'm running windows XP Pro service pack 1. The following error appears in the event log.

Event Type: Error
Event Source: nv
Event Category: None
Event ID: 106
Date: 17/09/2003
Time: 10:14:51 PM
User: N/A
Computer: MSR-9KYBWO0UQA5
Description:
Silent Running: Stress test transition: Performance 3D -> LowPower 3D
Data:
0000: 00 00 00 00 02 00 4e 00 ......N.
0008: 00 00 00 00 6a 00 aa c0 ....j.ªÀ
0010: 00 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

This error appears about 10 times then the system hangs with the blue screen and the event reads:

Event Category: (102)
Event ID: 1003
Date: 18/09/2003
Time: 06:53:19 AM
User: N/A
Computer: MSR-9KYBWO0UQA5
Description:
Error code 1000007f, parameter1 00000008, parameter2 80042000, parameter3 00000000, parameter4 00000000.

For more information, see Help and Support Center at

http://go.microsoft.com/fwlink/events.asp.

Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 37 1000007
0020: 66 20 20 50 61 72 61 6d f Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 38 2c 20 000008,
0038: 38 30 30 34 32 30 30 30 80042000
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 30 30 30 30 00, 0000
0050: 30 30 30 30 0000

After a reboot the system is ok for about and hour then the whole process repeats itself.

From help it appears to be hardware (memory or graphics card). Has anybody had a similar error or could tell me what is wrong and how to solve it?

Hardware config is:
ASUS P4C800 DLX
1024 PC400 mem
128mb nvidia FX5600
240GB SATA Drive in raid config

Would really appreciate help here!

 

[zampe]

Have same problem, with same system error notification. That is first happend when i traying install my USB motorola 4200 cable modem driver (step- communicating with modem) after fresh WinXP instalation. I resolve this with substitute memory in different memory bank, that happend again but rare.


configuration:
AMD barton 2800+
MSI K7N2 delta-L nforce2 motherboard
MSI FX5600 256DDR
512DDR work in single mode

WTF happend
please mail me to zampe@net.hr

 

[bcastner]

peniza's advice sounds good to me. The newsgroups have little on this issue, but one response may be relevant: "Are you using the 50.xx series of leaked drivers on this card ?"

I suspect that using the WHQL or thge latest "official" driver set for your video card, even if unsigned, would resolve the issue.

 

[Robyprog]

Having the same problem with WinXP Home SP1...I've installed the new WHQL (52.16_win2kxp_international_whql) but no way...while I'm' playing games like Max Payne 2 or NBA Live 2K3 (but not only), my pc reboots without any error notification or messages...can't find any explanation...can someone help me?

Running with:
Win XP Home SP1
Athlon XP 2000+
Maxtor 80 Gb HD
512 Mb DDR Ram
Nvidia GeForce4 MX440
Sound Blaster Live 5.1

Thx in advance....

Roberto

 

[bcastner]

Robyprog,

. Service Pack 1 installed?
. Upgraded to DirectX 9.0b from the MS update site?

1. Start, Run, Dxdiag. See if you get a clean run.
2. Is there any detail in Control Panel, Administrative Tools, Event Viewer?

3. Download and let run overnight a good memory tester.

Some excellent freeware choices:

http://oca.microsoft.com/en/windiag.aspare/procexp.shtml

http://public.planetmirror.com/pub/memtest86/util/processutil.htm

http://www.simmtester.com/PAGE/products/doc/docinfo.aspl

 

[1stITMAN]

Have a look here

http://www.eventid.net/display.asp?eventid=1003&source=

 

[zampe]

All what is in my power i traying:
-Flash BIOS to new version
-upgrade nForce motherboard driver
-flash VGA BIOS to new version
-setup new WHQL Forceware 5303 graphic card driver

also have:
-Service pack 1a
-all hot (and security) WinXP updates
-DirectX 9.0b


But for one thing im sure, problem starts with unsucessfull instalation of cable modem driver. He is removed from system (but not in all), look at this, what my MSI WMIinfo displayed:

Name : Motorola SurfBoard 4200 USB Cable Modem
Product Name : Motorola SurfBoard 4200 USB Cable Modem
Display Availability : Running/Full Power
PowerManagement Supported : false

From microsoft support centre i recived tip, that kind of error is in relation with new Device driver instalation

 

[bcastner]

There is absolutely no reason to install a "driver" for the cable modem.

 

[zampe]

I have some resons, like Americas Army Operations game work with that kind of cable modem (Motorola 4200) only if modem is connected (installated) to USB.
Network card freezes when player tray connect to game server.
But this is not theme for this topic

 

[bcastner]

Please see:

http://support.microsoft.com/default.aspx?scid=kb;en-us;819017

 

[Robyprog]

Thx bcastner! I've tried to download the progs from the links you gave but no way..I'lltry to find out something else. I'm running with Directx 9a, but got to check to be sure. In the event viewer I got this message (italian version):

Tipo evento: Errore
Origine evento: System Error
Categoria evento: (102)
ID evento: 1003
Data: 10/12/2003
Ora: 20.45.02
Utente: N/D
Computer: XXX

Descrizione:
Codice errore 10000050, parametro1 e4ac46a3, parametro2 00000000, parametro3 e4ac46a3, parametro4 00000002.
Per ulteriori informazioni, consultare la Guida in linea e supporto tecnico all'indirizzo

http://go.microsoft.com/fwlink/events.asp.

Dati:
0000: 74737953 45206d65 726f7272 72452020
0010: 20726f72 65646f63 30303120 35303030
0020: 50202030 6d617261 72657465 34652073
0030: 36346361 202c3361 30303030 30303030
0040: 3465202c 36346361 202c3361 30303030
0050: 32303030

This is one...I got lots of these errors...
Thanks again for your help!

Bye, Roberto

 

[Robyprog]

Hi bcastner,

I ran the memory tester but no error was found. Now I'll try with another video card hoping to solve the problem. Thx again for your aid.

Bye, Robyprog