Windows 2003 will not recognize a SCSI hard drive

[Dresdenlock]

I am having a problem with windows 2003 server recognizing the scsi hard drive. This is on a fresh install. The computer is a gateway select. Model # kadk7-600. Amd 600 MHz processor. the scsi hard drive is a 50 G. Hard drive was wiped clean.

 

[PurdueTNT]

Did you load the drivers (press f6) when you booted from the windows 2003 server disk. It will need this driver information before the installation can procede. I am assuming this is the boot disk. if not then I am way off base.

 

[Dresdenlock]

I was trying to load the drivers from the floppy drive when this message came up "File \winnt\ini910U.sys caused and unexpected error (18) at line 2187 in d: \ srv03rtm\base\boot\setup\oemdisk.c" this happened after selecting the corrct controller.