Windows 2003 Standard - Trying to create a VPN using RAS

[evilrootsa]

Im having trouble trying to setup a Microsoft VPN using LT2P/IPsec. I have the Microsoft Tutorial,

http://technet2.microsoft.com/Windo...7b46-4e67-8447-8443a7d8f2971033.mspx?mfr=true

but I dont understand the parts regarding answering/calling setups. the only thing i want to do is create the Site-to-site VPN not using Dial-up. Basically create the same sort of VPN that can be done on a Cisco/Foundry/Juniper Box. This vpn is not used for any mobile users, just two sites connecting to one another.
Any ideas?

Rob W.

 

[supportahm1980]

What step are you having trouble with. What have you tried so far? So you have a DHCP or using static ips for the clients? I did the setup in a lab and was very easy to do.

 

[evilrootsa]

Basically, the part about creating a Calling and answering end on both ends. Im using the article attached from Microsoft:

http://technet2.microsoft.com/Windo...7b46-4e67-8447-8443a7d8f2971033.mspx?mfr=true

A calling and answering ends????? So do i create both a calling and a answering server on the both servers or just one on each server? I dont believe In need to do a dialin since this is non-mobile.
Any help would greatly help me.

Rob W.

 

[evilrootsa]

So here is the scenario, I have to Static Sites, both have Windows 2003 Standard. I want to create a VPN between the two sites. Would I create 1 Answer Server and 1 calling Server? Any ideas would be greatly appreciated.


Rob W.