Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

win311 cdrom r/w format question

Status
Not open for further replies.

bjdobs

Programmer
Joined
Mar 11, 2002
Messages
261
Location
CA
trying to transfer some midi files to an old 486 running win311 ... I tried to make a cd on a R/W disk but cannot seem to get win311 to recognize it ... I think an R disk will work but seems a waste just to transfer 3MB of files

Is there a format for the R/W disks that will work on these older systems? Maybe even a generic driver?
 
Could be the cdrom in the 486 isn't capable of reading cdrw. If you only have 3MB of files, why not just use the floppy ?
 
Now there is the disconnect in technology ... Floppy Drives are no longer being shipped with newer systems plus the older systems don't have USB support ... so I guess its back to basics and do a Serial and or parallel transfer using old faithfulls like xtlink, laplink etc.


 

bjdobs:

Seems like a waste for an "R" disk? At about 3 cents a disc? And the time you've spent trying to get RW to work is valued at what? Not sure what your time is worth, but I assure you that it's worth more than 3 cents.

Cheers!
 
Thanx edemiere for that brilliant time is money diatribe ... Sorry I wasted your time! ... not sure what planet u live on ... CDR's may be 3 cents to make, however, where I live, u have to buy a bundle of CDR's on top of a Record Industry surcharge for all recordable media ... not something I wish to support at any price. Furthermore I try very hard not to subcribe to needless waste ... I follow the 3 R's whenever possible; Recycle, Repair and Reuse!
 
You could, of course, switch the drive from machine to machine. There are ongoing swap issues using cd-rws and no guarantee that any specific drive will be able to read one.
But that is another time issue.
Lap-link is one way, Or the interlnk/intersrv from DOS. Or several networking solutions using serial ports.

Seems like the manufacturers want to save the $3 to be able to sell them cheaper, and the related support issues. I used to say it would be a cold day when I got a machine without a floppy, but it has already happened. It was floppy capable, so now has one.

Ed Fair
Give the wrong symptoms, get the wrong solutions.
 
You have to have a multi-read CD-ROM and a UDF reader program to read CD-RWs. I doubt if the old 486 Win3.11 would pass either requirement.

Jim

 
bjdobs,

Maybe not 3¢ a piece, but surely you're not paying much more than 10¢ are you? Even so, you don't have to waste the entire disc. Make it a multisession CD-R allowing you to add data to it later, to fill up the other 600+MB.

If you truly believe that a parallel connection is worth your time and accordance with the 3 R's, then by all means do it! But the advice edemiere gave you makes more sense (pardon the pun) from a professional perspective, of which there is hardly any reason to fuss over 25¢ or less...


~cdogg
[tab]"All paid jobs absorb and degrade the mind";
[tab][tab]- Aristotle
[tab][navy]For general rules and guidelines to get better answers, click here:[/navy] faq219-2884
 
CD-RW discs are likely the problem here. Older CD-ROMs, even from the Pentium I era had issues with CD-RW. I've never seen a 4x or slower CDROM read a CD-RW disc. A Ricoh 8x CDROM did for me once, but mostly support for CD-RW didn't start until 16x CD-ROMs were popular.

CD-R discs are definitely more compatible, seeing that many work in CD players manufactured in the early to mid 90's.

Remember, Windows 3.11 could read store-bought CD-ROMs just fine. Therefore, as long as you burn in the Joliet format and use decent quality media, that shouldn't be a problem.


~cdogg
[tab]"All paid jobs absorb and degrade the mind";
[tab][tab]- Aristotle
[tab][navy]For general rules and guidelines to get better answers, click here:[/navy] faq219-2884
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top