In Win95 I uninstalled Com2 Com3 Com4 and LPT1 in the device manager. I left Com1. I was having a problem with Com2, I thouhght I would uninstall these then reinstall them. After closing down the computer I tried to reboot but I can't even get to the CMOS. When I turn the power on the fan goes on I don't get any beeps A: drive doesn't activate and the keyboard doesn't activate. Any Ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Will Not Boot
- Thread starter luccas
- Start date
DeanSpencer
MIS
Start by taking out all expansion cards except for the video. Unplug all ide and floppy cables. Re-seat the video card and ram, if video is PCI, try another slot. Try different ram and then powersupply. Last but not least, if it still dosen't boot, then it is most likely the motherboard or cpu.
Hope this helps.. >
:O> A+ MCP
deans@bellsouth.net
Hope this helps.. >
:O> A+ MCPdeans@bellsouth.net
- Status
