Where is Attendant Coverage Path??

[sirslacker]

We have a central location with a couple of nodes. 8710 on the hub and 8300s as the nodes. All of the nodes have DIDs that come from the hub. Any call to zero from an extension will route to the operator at the hub.

If, however, someone calls the phone number of that particular remote office, they will get that office's autoattendant. If they hit zero they will route to the admin of that office.

I need to have any calls to that node admin ring several stations at once. But ONLY if someone is calling the main number of that office and hitting zero. For calls coming from anywhere else the admin's phone should just ring normally.

I have a feeling this is controlled in trunking or somewhere but can't find it. I also don't see anything in vectoring.

 

[sirslacker]

Looking over the vector after I posted this, it shows routing on 0 different in a few instances. For instance, it says "goto step 15 if digits in table 2"

Can someone define and explain where the "tables" are? I think this is where I need to make a change.

 

[BIS]

tables = vector routing table (vrt)

change vrt 2