Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is the procedure to replace a periph/signalling card? 1

Status
Not open for further replies.
zigmo36

zigmo36

Technical User
Joined
Oct 19, 2009
Messages
114
Location
US
The error codes point to this as the culprit in this problem, due to a power event. Thanks very much for your consideration.
 
Sort by date Sort by votes
Disable the card in ld 39
faceplate disable card
replace card and enable faceplate then software enable in ld 39
 
Upvote 0 Downvote
Awesome, thanks!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

brison
  • Question Question
OPX card test
Replies
1
Views
184
gbtac3
gbtac3
G
  • Locked
  • Question Question
Remove PRI card
Replies
6
Views
748
telekon7
telekon7
Everest67
  • Locked
  • Question Question
ENET card CS1000M
Replies
6
Views
732
Firebird Scrambler
Firebird Scrambler
lexer
  • Locked
  • Question Question
Tandem trunking on E1 Card
Replies
9
Views
1K
lexer
lexer
LidLock Technologies
  • Locked
  • Question Question
Option 11 Universal Trunk Card Pinout
Replies
2
Views
636
SoftwareRT
SoftwareRT

Part and Inventory Search

Sponsor

Back
Top