Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is needed to add PRI to MICS 7.1?

Status
Not open for further replies.
jaxuser

jaxuser

Technical User
Joined
Apr 6, 2006
Messages
320
Location
US
I have the following; do I need anything else?
NTAB2769
NTBB24GA-93

Thank you.
 
Sort by date Sort by votes
Thank you for the prompt reply...
 
Upvote 0 Downvote
You will need the DTI card, a clocking card, PRI key codes and a lot of programing ability.

Wayne T
 
Upvote 0 Downvote
Have everything but the PRI card...thanks again for a quick reply.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
2K
curlycord
curlycord
V
  • Question Question
Trunk to trunk routing
Replies
7
Views
309
Firebird Scrambler
Firebird Scrambler
wardy5
  • Locked
  • Question Question
Additional speaker to paging system
Replies
4
Views
745
curlycord
curlycord
N
  • Locked
  • Question Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider
Replies
6
Views
1K
Nortel dino
N
Don W
  • Locked
  • Question Question
Mics software upgrade tools
Replies
9
Views
897
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top